File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 17:17, 8 January 2012 | Loose x pulley printing.jpg (file) |  |
251 KB | Printing with a loose pulley? this is what it looks like. First signs can be way less obvious. | 1 |
| 16:46, 8 January 2012 | Full crossbrace.jpg (file) |  |
317 KB | A crossbracing subsystem for the Prusa Mendel and similar. Files are here: http://www.thingiverse.com/thing:15606 | 1 |
| 16:37, 8 January 2012 | Torsion box y motor mount.jpg (file) |  |
403 KB | Picture of the working assembly. Files are here: http://www.thingiverse.com/thing:11017 | 1 |
| 16:47, 28 August 2011 | Woodsmoke labyrinth.ods (file) |  |
15 KB | The spreadsheet I use to check backlash using Woodsmoke's Lashmaze | 1 |
| 12:03, 26 August 2011 | Smooth rod collar.jpg (file) |  |
162 KB | == Smooth rod failsfe collar/clamp from an M8 nut == * you'll need a stationary drill (drill press), a center punch, 8mm and 2.5 mm drills, an M3 tap, M8 nuts, m3x6 (or similar) bolts * drill out the nut's center and apply 5-20 circular file strokes unt | 1 |
| 07:37, 25 August 2011 | Torsion box y mount.jpg (file) |  |
285 KB | An attempt to improve the Y motor mount and generally get a stiffer, more reliable simplified Mendel | 1 |
| 04:42, 16 August 2011 | Prusamendel mag x carriage2.jpg (file) |  |
319 KB | Vitamin-rich heat resistant, magnetic quick release three bushing X-carriage heavily inspired by GregFrost's X-carriage. Committed by Lanthan, August 2011. | 1 |
| 04:41, 16 August 2011 | Prusamendel mag x carriage.jpg (file) |  |
423 KB | Vitamin-rich heat resistant, magnetic quick release three bushing X-carriage heavily inspired by GregFrost's X-carriage. Committed by Lanthan, August 2011. | 1 |
| 04:01, 16 August 2011 | Inverted belt idler.jpg (file) |  |
214 KB | A Nophead's idea published in his blog: http://hydraraptor.blogspot.com/2011/06/half-belt-hack.html Implemented here for a Prusa Mendel X axis. Works perfectly for Y axis too. Allows for smoother operation and re-use of comparatively short belt bits. | 1 |
| 07:00, 15 August 2011 | Microsw holder 02.jpg (file) |  |
308 KB | Microswitch holder with 10 mm spacing between M2 holes. Mod of the Prusa Mendel Openscad file. | 1 |
| 06:57, 15 August 2011 | X reinforced 3.jpg (file) |  |
160 KB | Shaft collars for the X axis. Vitamin prepared and used by Lanthan, August 2011 | 1 |
| 06:22, 15 August 2011 | Endstop-holder microsw.scad (file) | |
1 KB | Openscad file for a Mendel / Prusa Mendel microswitch holder. 10 mm spacing between M2 holes. | 1 |
| 06:01, 15 August 2011 | Prusamendel finished.jpg (file) |  |
545 KB | Lanthan's Prusa Mendel interpretation. Mechanical build completed August 2011 | 1 |
| 05:45, 15 August 2011 | Benchtop router.jpg (file) |  |
315 KB | Largish (400 x 600 mm) benchtop router used in a bootstrap process. | 1 |
| 06:26, 3 August 2011 | Caveat inertial mass.jpg (file) |  |
394 KB | These gears were both printed from exactly the same gcode, "all other things equal", at 25 mm/s. The one on the left shows obvious lost steps on the y axis. The only difference was the addition of an 10x110mm aluminium plate (pictured above) to have a ful | 1 |
| 05:49, 28 July 2011 | Lanthans cupcake 03s.jpg (file) |  |
385 KB | Documenting the finished build | 1 |
| 05:47, 28 July 2011 | Lanthans cupcake 04s.jpg (file) |  |
494 KB | Documenting the finished build | 1 |
| 19:14, 27 July 2011 | Lanthans cupcake.jpg (file) |  |
455 KB | Lanthan's cupcakestrap, started in 2010, finished summer 2011. Reproducing a Prusa. | 1 |
| 08:23, 25 July 2011 | Tonokip firmware working with ramps and cupcakestrap.zip (file) | |
69 KB | A june 2011 snapshot of Tonokip (now Sprinter) firmware proven to work correctly with RAMPS 1.2 and a cupcakestrap. | 1 |
| 08:13, 25 July 2011 | Cupcakestrap for ramps tonokip configuration.h (file) |  |
7 KB | Working configuration.h file for June 2011 Tonokip firmware, RAMPS 1.2, 16x microstepping on all four axes and a "cupcakestrap" with Acme screws on Z axis. | 1 |
| 07:45, 25 July 2011 | Commissionned heatbed 04s.jpg (file) |  |
374 KB | pcb-milled heatbed on a cupcakestrap (printing parts for a Prusa) | 1 |
| 16:33, 20 July 2011 | Milled heatbed for cupcake 02s.jpg (file) |  |
417 KB | Heated build plate for pirated cupcake after some reality check. Total resistance: 2 Ohms | 1 |
| 16:30, 20 July 2011 | Milled heatbed for cupcake 01s.jpg (file) |  |
4.39 MB | A heated build plate for a pirated cupcake, just out of the mill | 1 |
| 15:28, 20 July 2011 | Routerized cupcake gcode.zip (file) | |
54 KB | Routerized cupcake (gcode files for a 4060 router cutting 6.7 mm plywood) | 1 |
| 15:26, 20 July 2011 | Routerized cupcake.zip (file) | |
118 KB | Routerized cupcake dxf files (adapted for 6.7 mm plywood) | 1 |
| 09:27, 20 July 2011 | Trace resistance.ods (file) | |
11 KB | Erased: error in milling depth used. | 2 |
| 15:00, 16 July 2011 | Basic indexer for hobbing.jpg (file) |  |
336 KB | Basic setup for bolt hobbing. http://www.thingiverse.com/thing:10110 | 1 |
| 14:47, 16 July 2011 | Early failure s.jpg (file) |  |
423 KB | Dremelled M8 x8 bolt indexed with 16 cuts - excellent grip, but early failure after less than 10 hours of printing. 15 to 12 cuts might yield better results. | 1 |
| 07:40, 11 December 2010 | Milling pcbs 06 detail.jpg (file) |  |
310 KB | Detail of pcb milling done on a tabletop cnc. 60 degrees cheap carbide v-bit with 0.2 mm flat end. Right: milled at 0.2 mm depth. Left: milled at 0.1 mm depth. | 1 |
| 07:38, 11 December 2010 | Milling pcbs 06.jpg (file) |  |
240 KB | Example of pcb milling done on a tabletop cnc. 60 degrees cheap carbide v-bit with 0.2 mm flat end. Right: milled at 0.2 mm depth. Left: milled at 0.1 mm depth. | 1 |
| 07:32, 11 December 2010 | Milling pcbs 05.jpg (file) |  |
168 KB | Example of pcb milling made on a tabletop cnc (the circuit is an H-bridge) | 1 |
| 07:30, 11 December 2010 | Milling pcbs 01.jpg (file) |  |
174 KB | Example of pcb milling (tabletop mill) | 1 |
| 07:23, 11 December 2010 | Milling pcbs 01 detail.jpg (file) |  |
298 KB | Copper plate milling with gEDA/pcb -> gerber and excellon files -> pcb2gcode -> EMC2/Axis. 60 degrees v-bit with 0.2 mm flat end. Milling at 0.1 mm (still to deep. epoxy-glass board. | 1 |
| 20:13, 23 October 2010 | Trace isolation voronoi pcb2gcode.png (file) |  |
7 KB | code generated by pcb2gcode interpreted by emc2 | 1 |
| 20:11, 23 October 2010 | Outp1.png (file) |  |
9 KB | Example output generated by pcb2gcode (trace isolation Voronoi regions for a Generation 7 opto-endstop) | 1 |
| 20:07, 23 October 2010 | Outp0.png (file) |  |
11 KB | Example of one of the outputs generated by pcb2gcode (generation 7 electronics opto-endstop) | 1 |
