I3 Z axis assembly
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
Connecting X-axiz and Z-axiz | Power and LCD assembly | Extruder assembly | Heated bed assembly
power switch and end stops assembly | Control Board assembly and wiring | Circuit DiagramZ-axis motor assembly
Need parts:
- 2×NEMA17 stepper motor
- 2×5*5 compling
Step 1
Insert motor shaft into compling and screw tighten.
Step 2
Insert stepper motor wires.Insert the motor wires from the bottom.
Step 3
Fixed the motor onto the acrylic frame.(M3*10 screws 8pcs, M3 gasket 8pcs),Please With the hex wrench to tighten the screws.