I3 Extruder assembly
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
Extruder assembly
Need Parts
- 1. 1×MK8A Parts
- 2. 1×40*40*11heat sink
- 3. 1×12V Cooling fan
- 4. 1×NEMA17 motor
- 5. 1×Feed filament wheel
- 6. 1×M6 nut
- 7. 2×M3*4 screw
- 8. 1×Bilateral groove bearing
- 9. 1×M4 gasket
- 10,11 2×7*10 plastic gasket
- 12. 1×M4*8 screw
- 13. 1×M5*8screw
- 14. 1×M4*18 scew
- 15. 1×M3*16 screw
- 16. 1×stainless steel spring
- 17,18 2×M3*40 scew
- 19. 1×MK8B parts
- 20. Nozzle(1 set)
Step 1 You need 1,7,4 accessories, Insert two M3 * 4 nuts in their positions .
Step 2 You need 13, 16 parts, assembled according to pictures.
Step 3 You need 14, 15,19 parts, assembled according to pictures.
Step 4 You need 8, 9,12 parts,put the M4 flat pad placed below the bearing, then tighten M4 screws.
Step 5 Please install both according to the picture.
Step 6 You need the 5 parts,Please install feed filament wheel.
Step 7 Under pressure with your finger release bearing, insert feeding wheel, adjust the position and releaseyourfinger.
Step 8 Please tighten support screw.