RUG/Pennsylvania/State College/Software/Parts/Hybrid Parts
(Redirected from RUG/Pennsylvania/State College/hybrid parts)
Quantity | File-Name | Comments | Diagram |
---|---|---|---|
4 | bed-spring_4off | ||
6 | Camiel_frame_vertex_6off | Alternative part by Camiel | |
2 | z-prusa-motor-mount_2off | ||
2 | prusa_bar-clamp_2off | ||
4 | pla_coupling_nophead-1piece_4off | Alternative part by Nophead | |
2 | x-180-z-bearing-plate_2off | ||
2 | x-360-z-bearing-plate_2off | ||
2 | x-360-z-bearing-plate-mirror_2off | ||
1 | xaxis-motor-bracket_1off | Alternative part by Rhys-jones | |
4 | x-bar-clamp-m3_4off | ||
4 | x-bar-clamp-m4_4off | ||
1 | x-end-bracket_1off | ||
4 | x-vert-drive-nut-trap_4off | ||
4 | x-vert-drive-side-plate_4off | ||
2 | PSU_x_vert_sideplate_360_end_2off | ||
8 | y-bar-clamp_8off | ||
1 | y-idler-bracket_1off | ||
1 | y-motor-bracket_1off_mod3-15 | Modified by PSU Reprap Collective | |
2 | z-bar-top-clamp_2off | ||
1 | HerringboneDrivenGear Herringbone Extruder Driver |
Alternative part by Rhys-jones | |
1 | HerringboneDriveGear | Alternative part by Rhys-jones | |
1 | Gregs_accessible_wades_v6 Greg's Hinged Extruder |
Alternative extruder by Greg-Frost | |
1 | Gregs_accessible_wades_idler | ||
1 | OpenX_Carriage_1off | Open X by Buback | |
1 | OpenX_Undercarriage_Bracket_1off | Open X by Buback | |
1 | OpenX_arm_PSU_1off | Open X by Buback, modified by PSU Reprap Collective | |
2 | OpenXY_bracket | ||
1 | OpenY_8mm_Belt_Harness_1off | Open Y by Buback, modified by PSU Reprap Collective | |
2 | OpenY_8mm_Crossbar_Mount_2off | Open Y by Buback | |
2 | OpenY_Arm 90 - 180_2off | Open Y by Buback | |
1 | OpenY_arm45 | Open Y by Buback | |
1 | OpenY_Undercarriage_Bracket | Open Y by Buback | |
3 | Electronics_board_mount | Created by RUG member SethG | |
2 | x-axis-side-plate-nut-jig_2off | ||
2 | z-leadscrew-base-bar-clamp_2off | ||
5 | prusa_modified_endstop_holder_2-5off | ||
2 | prusa_mendel_endstop_holder_x_y_axis | ||
1 | prusa_mendel_endstop_holder_z_axis |