Pages that link to "Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions"
The following pages link to Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions:
View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)- ABS (← links)
- PLA (← links)
- Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing (← links)
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System (← links)
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament (← links)
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament (← links)
- Mechanical testing of polymer components made with the RepRap 3-D printer (← links)
- Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication 3-D Printing (← links)
- Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens (← links)
- Viability of Distributed Manufacturing of Bicycle Components with 3-D Printing: CEN Standardized Polylactic Acid Pedal Testing (← links)
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament (← links)
- Open source 3-D printing of OSAT (← links)
- Open source rapid prototyping of OSAT (← links)
- Tensile test protocol: MOST (← links)
- Development and feasibility of applications for the RepRap 3-D printer (← links)
- Life cycle analysis of distributed polymer recycling (← links)
- Solar powered distributed customized manufacturing (← links)
- MOST RepRap Build (← links)
- Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing (← links)
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing (← links)
- Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties (← links)
- 3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing (← links)
- Wood Furniture Waste-Based Recycled 3-D Printing Filament (← links)
- Thermal properties of 3-D printed polylactic acid-metal composites (← links)
- Three Hundred and Sixty Degree Real-Time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views (← links)
- Factors effecting real-time optical monitoring of fused filament 3D printing (← links)
- Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid (← links)
- PLA/ua (← links)
- Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins (← links)
- PLA/de (← links)