Laybrick
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
3D printing filament Laybrick-beta, gray and white, 250 g
Laybrick - A sandstone-like filament and rough, very suitable for professional forms and models in the industry and especially in architecture
Water Colored Octagonal Lighthouse
Features:
• Product surfaces can be adjusted between smooth and rough • Pressure Temperature range: 165 ° C - 190 ° C for smooth surfaces and from 210 ° C for rough surfaces (cooling apply) • Laybrick 3D printed products have a temperature resistance of up to 70 ° C • Warping can almost be considered as excluded • pressure can be carried out without heating bed • Ingredients: co-polyester, natural minerals such as ground limestone • products are both colorable and sanded • pressure layer thicknesses of 0.1 - 0.4 mm recommended • Cooling time after the pressure is between 2-3 hours, depending on Pressure Temperature (please do not touch or move at this time)
Note: Be careful with the FIlament, it breaks very easily.