Mendel User Manual
Contents
General
Using RepRap
Designing things to make
The simplest scenario: converting a simple 2D image into printable object
Preparation
This short guide assumes you are running a free software *nix operation system and free software tools only. It will probably work on Mac OS, and you might even get lucky on a Windows system.
In addition to your raster image, you will need the following software tools:
- inkscape vector drawing program
- openscad 3d cad modeller
- skeinforge 3d model slicer
- pronterface reprap printer graphical interface
HINT: If you want to follow the instructions below in English even though your language environment is different, you can force a program to start in English. With inkscape for example, open a terminal and type:
LANG=C inkscape
Raster to vector image conversion
- Start inkscape (hint: if you use linux, but your co
More
If you are designing things to be made in RepRap, Ed's guide on to how to design for FFF above may be useful. It's written for the Stratasys Dimension proprietary RP machine, but almost all of what it says is relevant to RepRap too. One difference: ignore the section on adjusting hole diameters to get them to come out right. On RepRap, if you specify a 3mm hole, it comes out as 3mm...
Rather than design things completely from scratch, you might save a bit of time by starting from something in the Available Files and tweaking it to fit your needs.
See also the Useful Software Packages to create STL models.
Mechanical
Software and Firmware
- Installing RepRap Host Software
- Configuring your RepRap
- Firmware Help
- Host Software Help
- Mendel User Manual: Host Software
Files and Formats
- RepRap G Codes - This defines all the G Codes used to communicate from the host computer to the RepRap machine.
- Java Software Preferences File
- RFO file format - Saving and loading multiple objects on RepRap's build base.
Translations of this page
Deutsch: Mendel_Gebrauchsanleitung