HackerBot print area
HackerBot Documentation
Assembling Print area
qty | part name | description/notes |
---|---|---|
1 | Print bed | PCB 300x300 heatbed |
1 | Heatbed Aluminum 300x300 | 12V/24V |
4 | Heatbed springs | 25mm length compression spring (1.2mm wire) |
4 | M3x35 socket head cap screw | use a washer to avoid scratching the heatbed |
1 | Cable holder support | |
2 | M3x14 socket head cap screw | cable holder support screws |
4 | Back binder clip |
First assemble and check: MK Heatbed wiring
** Print area COMPLETE **
** GO TO >> HackerBot base **