HackerBot Z system
HackerBot Documentation
Contents
Z System assembly
qty | part name | description/notes |
---|---|---|
1 | Print area support L-shaped | File:Print area support-L-shaped plate.PDF |
2 | SC16LUU | 16mm linear bearing with housing |
2 | 16mm Shafts | length: 350mm |
8 | M5x20 socket cap hex screw with washers | |
1 | Z mechanical endstop | position it with nylon spacers and n.2 M3x5 button hex head screw |
1 | Trapezoidal screw | 12x2 (MTSBRA12-330-S10-Q8) or 12x3 |
1 | Trapezoidal nut | 12x2 (MTSFR12) or 12x3 |
4 | M4x20 hex screw and nut | Trapezoidal nut screws |
4 | SK16-kit | Shaft supports + M5x16 screws + HNTF6-5 t-nut |
Z stepper motor assembly
qty | part name | description/notes |
---|---|---|
1 | Z Stepper motor support plate | |
2 | M6x12 socket head screw | |
2 | M6 post assembly nut | Misumi HNTF6-6 or Bosch 3842501753 |
1 | Z Stepper motor | nema 17 1.7A |
4 | M3x10 hex screws + washer | motor screws |
1 | Motor-Trapezoidal coupler | flexible coupling 5 mm and 8 mm diameter |
Take the stepper motor for the z-axis and join the motor shaft toward top to stepper plate with the screws and washers (stepper motor kit of this section checklist).
On the other side of the stepper plate, add the flexible coupling to the motor shaft (5mm of diameter).
Print plate (Heatbed)
qty | part name | description/notes |
---|---|---|
1 | Aluminium BED support | File:Aluminium heatbed support.dwg |
5 | M5x20 + washer + nut |
Z Endstop adjustment
qty | part name | description/notes |
---|---|---|
1 | Z endstop tuning support | File:Z Endstop tuning.pdf |
1 | Z endstop knob | |
1 | Z endstop spring | |
1 | M3 threaded rod length 65mm | Only bowden type head |
1 | M3 threaded rod length 80mm | Only direct type head with Vulcano E3D hotend |
1 | M5 Socket head screw | M5x16 |
1 | HNTF6-5 | T-nut |
Assemble Z endstop knob, M4 threaded rod with a grub screw (or use Loctite 243)
** Z COMPLETE **
** GO TO: HackerBot door **