Mini3dprintercontroller
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
Release status: developing
[[image:|center|190px]]
Description | the mini3dprintercontroller Electronics
|
License | Creative Commons BY-NC-SA 3.0
|
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | GitHub
|
External Link | (none)
|
The mini3dprintercontroller Board is part of Mini3dprintercontroller Electronics.
This is the central part of mini3dprinter Electronics. A board with all the features required to run a printer in a very small board 50 X 50 mm and also including a header to plug in driver boards for stepper motors control and lcd and micro sd cardreader too. This version have 2 heater for a struder and bed, also power for fan, 3 limits and 2 for temperature sensors like termistors and serial port for the USB-TTL adapter.