FTIStrap
This page describes the "FTIStrap", a RepStrap which is almost completely built from FischerTechnik parts. Stepper motors are used for precise movement, the interior of a hot-melt gun forms the extruder and a (removable) glass plate acts as the base to print on. A FischerTechnik "Robo Interface" together with an extension module control the steppers - they run in "online mode" and are driven by an IBM-compatible PC running Windows or Linux or a Macintosh running MacOS X
(please note: because of relatively strict time limits, I plan to document the FTIStrap piece by piece finishing around midth of november)
Its main characteristics are
- the FTIStrap almost completely consists of FischerTechnik parts - stepper motors are
(which can easily be ordered online) - all other parts may be also bought online or found in various shops in your neighbourhood - no special tools are required to build the FTIStrap - although a hacksaw is recommended to cut the balsa wood