Printing Material Suppliers
Filament
Below is a table listing suppliers of filament. Costs are only approximate and are likely to change. Always check before ordering, and if you can, update this page. If there are any missing fields in the table, please feel free to update. In addition, Andrew Dent created a rather handy "swatch" that gives alot more information. This is publicly editable and available here.
3mm diameter filament
Please keep the tables in alphabetical order.
Vendor (with link) | Shipping location | Material(s) | Approximate costs | Additional notes |
---|---|---|---|---|
2PrintBeta | From Germany | PLA | ~42€ for 100 m | many colors available |
BitsFromBytes | From UK | ABS, HDPE, LDPE, PLA, PP, uPVC | Varies but usually £40-45 in 1kg or 2kg rolls depending on material | None |
BotMill | FREE SHIPPING IN USA | ABS, PLA | USD 9.95-11.95 per lb, min 1lb order. | Large variety of low-cost colored ABS (NEW COLORS: Terra Cotta, Orange, Light Blue, Olive Drab, Dark Grey) and PLA. Worldwide shipping |
Buy 3D Ink | From USA | ABS, HDPE | USD 6.99 per lb ABS (5+ lb rolls) USD 5.99 per lb HDPE (5+ lb rolls) | Website clearly says "..you will get two or three spools that will total more than 5lbs." Confirmed through an actual order. |
Diamond Age Solutions Ltd. | From NZ | PLA, ABS | NZ$25-30 per 100 metre (0.9kg) roll, approx NZ$20 shipping per roll to Europe/US | Various colours & luminous. Also sells parts. Contact vik [at] diamondage.co.nz |
FabricationsOfTheMind | From UK | ABS | 1kg – £19.95, 2kg (£15.98/kg) – £31.95, 5kg (£12.99/kg) – £64.95 | None |
German RepRap Foundation | From Germany | ABS | ABS on spools for a better unrolling (54,95€ for 2,2kg) | worldwide shipping |
LYBINA Pty Ltd | From Australia | ABS, PLA, HDPE, PP, PVC | 50 Mtr ABS /HDPE /PP /PVC Coil and Bagged from $ 18.10 inc. GST + Transport |
Contact Though Website LYBINA Contact Us Page Credit Card Facilities Available |
Makerbot | From US | ABS, PLA | ABS USD 10-16 / lb (sold in 5lb lots) PLA USD 16 / lb (sold in 5lb lots) |
None |
MakerGear | From US | ABS, PLA, HDPE | ABS USD 13-16 / 1lb (sold in 1lb & 5lb rolls and 10 ft trial pieces) PLA USD 11-17.50/lb (sold in 1lb & 5lb rolls and 10 ft trial pieces) HDPE USD 10 (sold in 1lb rolls and 10ft trial pieces) |
None |
New Image Plastics | From US | ABS, PVC, HDPE, working on PLA | ABS USD 8 per lb, min 10lb order | Phone 330-854-3010 |
plasticweldingrod.com | From US | ABS | (5 lb minimum order) | Call Donna at +1 (330) 854-3010 and tell them Forrest or Reprap sent you. delivery on small orders tends to take several weeks. |
Plastireal | From Brazil | PVC HDPE PP | R$20 / kg | São Paulo store. |
RepRapSource | From Germany | ABS, PLA | 99€ / 5kg | Different colours available |
RepRapCentral.com | From UK | ABS, PLA | 11b and 51b packs with spool if needed | Contact Pete - Many different colours/types available. As much or as little as you need, as quickly as we can - Worldwide delivery |
UltiMachine | From US | PLA | USD 9.50-12 / lb (sold in 5lb lots) | None |
Wim-kd85.com | From Belgium (EU) | ABS, PLA | 35€ to 75 / 5kg rolls depending on the material | None |
1.75mm diameter filament
Vendor (with link) | Shipping location | Material(s) | Approximate costs | Additional notes |
---|---|---|---|---|
MakerGear | From US | ABS | ABS USD 17.50/ 1lb (sold in 1lb rolls) | Red, Blue, Green, Black, White, Orange, Pink & Purple. |