A Nema14 compact dual drive geared extruder
A Nema14 Compact Dual Drive Geared Extruder
Release status: experimental
Description | A dual drive geared extruder made with a Nema14 motor.
|
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Introduction
In an earlier post [1] I described a dual drive geared extruder made entirely from scratch. With ABS and hotend set to 220C and a 0.4 mm nozzle the extruder yielded a flow rate of 25 mm3/s, a good result. But the overall assembly was bulky (but no problem if its used as a Bowden extruder). In this post I describe a more compact version of a Dual Drive Geared Extruder, made with a Nema14 motor. The motor/drives transmission rate was 69:15.