Talk:MKS GEN
bonjour
Comment utiliser Heather 1 D7 pour E1
Merci
dans {Pins.h}
J'ai trouve par moi même, remplacer le "-1 " en "7"
#if MB(RAMPS_13_EFB) || MB(AZTEEG_X3) #define HEATER_1_PIN -1 #else #define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter) #endif
OU
#if MOTHERBOARD == 33 || MOTHERBOARD == 67 #define HEATER_1_PIN -1 #else #define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter) #endif
MOTHERBOARD 33 Instructions
For the MKS Gen v 1.4 is it still MOTHERBOARD 33 which is the Ramps 1.3? It looks like the MKS boards were added to Marlin. Should it now be MOTHERBOARD BOARD_MKS_GEN_13 which is number 44 in Marlin 1.1.9 (see http://marlinfw.org/docs/development/boards.html)?
Also the wording is confusing as presented. I would delete "MOTHERBOARD 34" at the end of the comments because it sounds like you are saying the MKS Gen is compatible with MOTHERBOARD 34 rather than I believe that was the default value left at the end of the comment.