StrongPrint
This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!
//identifies pages under construction. remove when the page is relatively stable.
Release status: Experimental
Description | Metal 3D printer based on Enlarged Rostock
|
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | OpenScad
|
External Link |
Background
Inspired by the Metal Delta RepRap v1 to propose a very affordable metal 3d printer but it is based TIG (GTAW) process which has the potential to be more precise and it allows to use a cheap low power inverter MMA welding power source.
It has been developed in two month thanks to the support of the Artilect FabLab in toulouse
It is not yet operational but it is able to deposit metal on a steel plate.
General Design
The printer is based on the Enlarged Rostock [1] which was based on the Rostock from Johann
Bill Of Materials
- Welding source: GysMi 80p 120 (any inverter based MMA power source should do, it might be advised to go up to a 130A one ) - Round Shaft: 12mmx1000mm Z-12-1000A x 6 -> 88.12Eur Obtained From HPC Europe: http://shop.hpceurope.com/an/produit.asp?prid: - - 1321&produit=Shaft+for+linear+guidance&famille=Linear%20motion&catalogue=Linear%20guidance%20parts
- Belt 2m T2.5 x3 & Pulley 18 tooth x3 in fact got 16tooth ones -> 75.06Eur + 18.63Eur Obtained from eMotion Tech : http://www.reprap-france.com/14-courroies Gen 7 V1.4.1 board x 1-> 145Eur Obtained from eMotion Tech : http://www.reprap-france.com/12-electronique
- Nema17 400 step/turn x4 -> 88.30Eur Obtained from Selectronics: http://www.selectronic.fr/moteur-pas-a-pas-modele-pap-2.html - Belt 2m T2.5 x3 & Pulley 18 tooth x3 in fact got 16tooth ones -> 75.06Eur + 18.63Eur Obtained from eMotion Tech : http://www.reprap-france.com/14-courroies