4pi
Revision as of 13:15, 23 February 2013 by Arthurwolf (talk | contribs)
4pi
Release status: working
Description | ARM-Based reprap electronics
|
License | GPL
|
Author | |
Contributors | |
Based-on | [[]]
|
Categories | |
CAD Models | |
External Link |
About the 4pi board
The 4pi board is a 4xpi sized controller board for reprap 3D printers.
It descends from previous reprap electronics like RAMPS and Sanguinololu, it's main novelties are the use of a more powerful chip ( Atmel 32bits ), and a full-SMT design.
About the 4pi firmware
The 4PI firmware is a port of the Sprinter firmware.
The G-code parser has been rewritten, and so the sd-card handling, as well as many other improvements.
Also new G-code commands were added:
- M109. Set extruder temperature and wait.
Compiling and uploading
Overview
- Grab the firmware here.
- Compile the firmware OR get a precompiled one
- Upload the firmware to the hardware