Printing Material Suppliers
Filament
Below is a table listing suppliers of filament. Costs are only approximate and are likely to change. Always check before ordering, and if you can, update this page. Please keep the tables in alphabetical order. If there are any missing fields in the table, please feel free to update.
3mm diameter filament
Vendor (with link) | Shipping location | Material(s) | Approximate costs | Additional notes |
---|---|---|---|---|
BotMill | From US | ABS | USD 9.95-11.95 per lb, min 1lb order. | Large variety of low-cost colored ABS |
3DP-TOOLS | From Switzerland | ABS | CHF 29 / kg, also available on spools | worldwide shipping |
BitsFromBytes | From UK | ABS, HDPE, LDPE, PLA, PP, uPVC | Varies but usually £40-45 in 1kg or 2kg rolls depending on material | None |
Diamond Age Solutions Ltd. | From NZ | PLA, ABS | NZ$25-30 per 100 metre (0.9kg) roll, approx NZ$20 shipping per roll to Europe/US | Various colours & luminous. Also sells parts. Contact vik [at] diamondage.co.nz |
FabricationsOfTheMind | From UK | ABS | 1kg – £19.95, 2kg (£15.98/kg) – £31.95, 5kg (£12.99/kg) – £64.95 | None |
German RepRap Foundation | From Germany | ABS | ABS on spools for a better unrolling (54,95€ for 2,2kg) | worldwide shipping |
Makerbot | From US | ABS, PLA | ABS USD 10-16 / lb (sold in 5lb lots) PLA USD 16 / lb (sold in 5lb lots) |
None |
MakerGear | From US | ABS, PLA, HDPE | ABS USD 13-16 / 1lb (sold in 1lb & 5lb rolls and 10 ft trial pieces) PLA USD 11-17.50/lb (sold in 1lb & 5lb rolls and 10 ft trial pieces) HDPE USD 10 (sold in 1lb rolls and 10ft trial pieces) |
None |
New Image Plastics | From US | ABS, PVC, HDPE, working on PLA | ABS USD 8 per lb, min 10lb order | phone 330-854-3010 begin_of_the_skype_highlighting 330-854-3010 end_of_the_skype_highlighting |
plasticweldingrod.com | From US | ABS | (5 lb minimum order) | Call Donna at +1 (330) 854-3010 and tell them Forrest or Reprap sent you. delivery on small orders tends to take several weeks. |
RepRapSource | From Germany | ABS | 99€ / 5kg | None |
UltiMachine | From US | PLA | USD 9.50-12 / lb (sold in 5lb lots) | None |
Wim-kd85.com | From Belgium (EU) | ABS, PLA | 35€ to 75 / 5kg rolls depending on the material | None |