SmartOne 150
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
SmartrapOne 150 | How to Get SmarOne 150 | SmarOne 150 Build Manual | How to Use SmartOne 150 | SmarOne 150 Improvements
Release status: experimental
Description | Based on Prime Line rollers.
|
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Contents
Introduction
Overview
Printer size: 340mm x 340mm x 380mm (13"x13"x15"). Printing Envelop: 150mm x 150mm x 180mm (6"x6"x7"). Material: PLA 1.75mm (optional heatbed) Nozzle: 0.35mm
Design Goals
- High accuracy linear motion.
- Low cost of build.
- All printable components have purchasable off-the-shelf counterparts
- Easy to source components.
- High speed print.
- Quiet Operations.
Cost
We plan to sell complete kit for ???
Component Sourcing
Aluminum Extrusion: Misumi
- HFS3-1515-330 - 4
- HFS3-1515-300 - 12
Rollers:
HomeDepot or Lowes
- Prime Line Nylon Oval Edge Rollers (M-6151 - pack of 4).
We will stock all parts to help others here:
X-axis
Y-axis
Z-axis
Printable Components
A number of SmartOne 150 components was 3D printed to reduce build costs.
Electronics
Almost all RepRap electronics such can be used to control the SmartOne. Electronics confirmed to be working include RUMBA, Printrboard, GEN7, RAMPS, and Rambo.
RAMPs mounting plate included in plastic parts.