StrongPrint
This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!
//identifies pages under construction. remove when the page is relatively stable.
Release status: Experimental
Description | Metal 3D printer based on Enlarged Rostock
|
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | OpenScad
|
External Link |
Background
Inspired by the [Metal Delta RepRap v1] to propose a very affordable metal 3d printer but it is based on a cheap low power inverter MMA welding power source performing TIG (GTAW) process. This choose of process is more difficult to set-up but allows to have a much better resolution.
General Design
The printer is based on the Enlarged Rostock [1]
Bill Of Materials
- Welding source: GysMi 80p 120 (any inverter based MMA power source should do, it might be advised to go up to a 130A one ) - Round Shaft: 12mmx1000mm Z-12-1000A x 6 -> 88.12Eur Obtained From HPC Europe: http://shop.hpceurope.com/an/produit.asp?prid: - - 1321&produit=Shaft+for+linear+guidance&famille=Linear%20motion&catalogue=Linear%20guidance%20parts
- Belt 2m T2.5 x3 & Pulley 18 tooth x3 in fact got 16tooth ones -> 75.06Eur + 18.63Eur Obtained from eMotion Tech : http://www.reprap-france.com/14-courroies Gen 7 V1.4.1 board x 1-> 145Eur Obtained from eMotion Tech : http://www.reprap-france.com/12-electronique
- Nema17 400 step/turn x4 -> 88.30Eur Obtained from Selectronics: http://www.selectronic.fr/moteur-pas-a-pas-modele-pap-2.html - Belt 2m T2.5 x3 & Pulley 18 tooth x3 in fact got 16tooth ones -> 75.06Eur + 18.63Eur Obtained from eMotion Tech : http://www.reprap-france.com/14-courroies